Eulex M, Koch Chemie 264001

Koch Chemie Eulex M is a professional-grade adhesive remover designed for the effortless removal of adhesive residues, tree sap, rubber marks, and other stubborn organic contaminants from vehicle surfaces. Its low-odor formula penetrates and softens residues quickly, allowing for easy and safe removal without damaging compatible surfaces.

Unlike many solvent-based removers, Eulex M contains non-flammable active ingredients that evaporate slowly, providing extended working time for improved cleaning performance. It is suitable for use on conventional paintwork, matte-painted vehicles, glass, ceramic, and metal surfaces.

Approved by Daimler, Eulex M is an ideal solution for professional detailers, body shops, dealerships, and vehicle care enthusiasts seeking a safe and effective contaminant remover.

Key Features

• Removes adhesive residues quickly and effectively
• Dissolves tree sap, rubber marks, and organic contaminants
• Safe for matte and gloss paint finishes
• Low-odor professional formula
• Non-flammable active ingredients
• Slow evaporation for extended working time
• Suitable for paint, glass, ceramic, and metal surfaces
• Easy wipe-off application
• Free from halogenated hydrocarbons
• Daimler approved

Applications

Eulex M is ideal for removing:

• Adhesive and sticker residues
• Tree sap deposits
• Rubber transfer marks
• Glue contamination
• Organic surface contaminants

Suitable for:

• Vehicle paintwork
• Matte-painted vehicles
• Glass surfaces
• Ceramic surfaces
• Metal components

Directions for Use

For Matte Paint Surfaces

1. Ensure the surface is cool to the touch.
2. Spray Eulex M undiluted onto the affected area.
3. Allow the product to dwell for 1–3 minutes.
4. If necessary, gently wipe using a soft sponge without pressure.
5. Rinse thoroughly with a high-pressure washer.
6. Wash the vehicle with a suitable shampoo and dry carefully.

For Standard Paint, Glass, and Metal Surfaces

1. Spray the product directly onto the contamination.
2. Allow it to penetrate and soften the residue.
3. Remove loosened contaminants with a clean microfiber cloth.
4. Rinse or wash the area if required.

Safety Information

• Do not allow the product to dry on surfaces.
• Do not use on hot surfaces.
• Not suitable for polycarbonate, acrylic, or similar plastics.
• Always test compatibility on an inconspicuous area before use.
• Consult water recycling system manufacturers before use in recycling plants.