Moisture Meter

Easy to use.
Simply press two buttons, wait a few seconds, align the material to be tested and the data will be displayed.
Thanks to the automatic calibration, you can measure quickly and safely after just two button presses.
Press the purple power switch. The display shows 0.0 and HOLD as well as 0.0 for the maximum and minimum value.

Protect work surfaces and widely used.
The pin-less moisture meter comes without pins, leaving your walls and projects undamaged by pinholes, scrapes and scratches to determine their moisture content.
Suitable for repairing water leaks, detecting high humidity on bedroom walls, etc. Suitable for wood, brick, stone, stucco and other materials.

Penetration
High-frequency waves can be used for masonry approx. 40 mm. (Please try to be as close as possible to the material being tested).
If necessary, you can turn the backlight of the display on and off by pressing the left green UP/Light button.

Special shielding.
The integrated shielding in the moisture meter reduces environmental impact.
Humidity range: 0.0 to 100.0 Accuracy: ± (2% of full +5 digits) Measuring depth: 0.79 to 1.57 inches (20 to 40 mm).

Calibrate
To start the measurements with a calibration, press the top green MEAS button. The device automatically performs the calibration and informs you about this process with an acoustic signal and the display CAL. After successful calibration, the display first shows the value 0.0, then you can read readings directly and continuously.